Tel : +86-18656811550
Fax : +86-557-5016618
Email :jamie@alucheckerplates.com
Products
Product Name:
6061 aluminum plate sheet China factory
No. :
:
:
6061 is a heat-treatable-strengthened alloy with good formability, weldability, machinability, and moderate strength, which can maintain good operability after annealing.
The main alloying elements of 6061 alloy are magnesium and silicon, and form the Mg2Si phase. If it contains a certain amount of manganese and chromium, it can neutralize the bad effects of iron; sometimes a small amount of copper or zinc is added to improve the strength of the alloy without significantly reducing its corrosion resistance; there is also a small amount of conductive material. Copper to offset the adverse effects of titanium and iron on electrical conductivity; zirconium or titanium can refine grains and control recrystallization structure; in order to improve machinability, lead and bismuth can be added. Mg2Si is solid-dissolved in aluminum, which makes the alloy have artificial aging hardening function.
6061-T651 is the main alloy of 6061 alloy. It is a high-quality aluminum alloy product produced by heat treatment and pre-stretching process. Although its strength cannot be compared with 2XXX series or 7XXX series, its magnesium and silicon alloys have many characteristics and have processability. Excellent, excellent welding characteristics and electroplating, good corrosion resistance, high toughness and no deformation after processing, dense material without defects and easy to polish, easy to color film, excellent oxidation effect and other excellent characteristics.
Because 6061 aluminium alloy is easy to extrude, it can provide a variety of product forms such as sheet, strip, plate, rod, forgings, tubes, pipes, wires, extruded parts and structural shapes. Aluminum 6061 has good corrosion resistance, mechanical properties, formability, weldability, and machinability.
It belongs to 6000 series (Al-Mg-Si) alloy aluminum sheet and has good weldability. At the same time, 6061 aluminum coil sheet has excellent aluminum-magnesium composition ratio and strong corrosion resistance. The hardness is 95HB (Brinell), easy to process and form, non-stick knife
6061 Aluminium Aging 6061 aluminium alloy sheets, plates, rolled or cold-rolled wire, rods, bars, and drawn tubing are aged to a metal temperature of 160 °C (320 °F) and maintaining it for 18h. Extruded rods, rods, shapes and tubes; dies and hand forgings, rolled rings are aged to a metal temperature of 175 °C (345 °F) and held for 8 hours
Temper: T1,T2,T3, T4, T6, T651
Thickness:0.2-350mm
Width:30-2600mm
Length:200-11000mm
Mother coil: CC or DC
Weight: About 2mt per pallet for general size
MOQ: 5-10ton per size
Protection: paper inter layer, white film, blue film, black-white film, micro bound film, according to your requirement.
Surface: clean and smooth, no bright speck, corrosion, oil, slotted, etc.
Standard product: GBT3880, JIS4000, EN485, ASTM-B209, EN573
Delivery time: about 30days after receiving the deposit
Payment: T/T, L/C at sight
Trading terms: FOB, CIF, CFR
The application of strips is widely used in decoration, packaging, construction, transportation, electronics, aviation, aerospace, weapons and other industries.
Aerospace aluminum is used to make aircraft skins, fuselage frames, girders, rotors, propellers, fuel tanks, siding and landing gear struts, as well as rocket forging rings, spacecraft siding, etc.
Aluminum for transportation is used for car body structural parts of automobiles, subway vehicles, railway passenger cars, high-speed passenger cars, doors and windows, shelves, automobile engine parts, air conditioners, radiators, body panels, wheel hubs and ships.
Aluminum material for packaging All-aluminum pop-top can materials are mainly used as metal packaging materials in the form of sheets and foils, which are made into cans, lids, bottles, barrels and packaging foils. Widely used in beverages, food, cosmetics, medicines, cigarettes, industrial products and other packaging.
Aluminum for printing is mainly used to make PS plate. Aluminum-based PS plate is a new type of material in the printing industry, which is used for automatic plate making and printing.
Aluminum alloys for architectural decoration are widely used in building frames, doors and windows, ceilings, decorative surfaces, etc. because of their good corrosion resistance, sufficient strength, excellent process performance and welding performance. Such as various building doors and windows, aluminum profiles for curtain walls, aluminum curtain wall panels, profiled panels, checkered panels, color-coated aluminum panels, etc.
Aluminum for electronic appliances is mainly used in various busbars, wires, conductors, electrical components, refrigerators, air conditioners, cables and other fields. Specifications: round bar, square bar
Representative uses include aerospace fixtures, electrical fixtures, communications, and are also widely used in automated mechanical parts, precision machining, mold manufacturing, electronics and precision instruments, SMT, PC board solder carriers, etc.
Chemical composition range
0.4～0.8Si, 0.70Femax, 0.15～0.40Cu, 0.15Mnmax, 0.80～1.20Mg, 0.04～0.35Cr, 0.25Znmax, 0.15Timax, the maximum content of each other component is 0.05, the maximum total content of other components is 0.15, and the balance is Al.
